Adaptive exterior shading systems can significantly reduce the energy buildings need for temperature control. In practice, however, their use often fails because of the mechanics: hinges and bearings wear out under weathering and require regular maintenance. Compliant mechanisms avoid this problem because they generate motion solely through the elastic deformation of the material. In the preceding projects 3DSunTrack (https://www.itft.uni-stuttgart.de/research/ClosedResearchProjects/3DSunTrack/) and Flectuation (https://www.itft.uni-stuttgart.de/research/ClosedResearchProjects/Flectuation/), such fiber-reinforced hinges were developed and tested up to the scale of a facade demonstrator. So far, however, they have been made of glass fiber-reinforced plastics, which are energy-intensive to produce and difficult to recycle.
In contrast to previous projects, the WoodShape feasibility study aims to produce adaptive shading elements from renewable raw materials. To this end, movable slats made of engineered wood are combined with compliant hinges made of a cellulose fiber-reinforced plastic. Since both components are cellulose-based, the result is a largely single-material and therefore recyclable component.
The use of cellulose composites in cyclically loaded components exposed to the weather has hardly been investigated to date. The hinges are based on a hybrid yarn developed at DITF, consisting of high-strength cellulose filaments and a cellulose propionate matrix, which is woven into a narrow tape. At ITFT, this tape is placed using an automated tape-laying process. The fiber orientation allows the mechanical properties of the hinge zones to be tailored, while automated placement ensures precise and reproducible manufacturing. Researchers at itke are developing an actuation concept in which fluidic muscles reversibly bend the film hinge, thereby opening and closing the slats. Coatings for fire and weather protection ensure the durability of the wood elements outdoors. At the end of the project, all components will be integrated into a full-scale demonstrator.
The project thus addresses several relevant environmental aspects: low-maintenance adaptive shading reduces energy demand during building operation, replacing glass fiber-reinforced plastics with cellulose composites lowers the embodied energy of production, and the single-material concept lays the groundwork for closed material cycles. Since wood is also suitable for historic, heritage-protected facades, the existing building stock becomes a potential field of application as well. Finally, automated tape placement provides the basis for a later transfer to industrial production.
Project Duration
March 2026 – February 2027
Project Team
University of Stuttgart, Institute for Textile and Fiber Technologies (ITFT)
Matthias Ridder, Dr.-Ing. Larissa Born
University of Stuttgart, Institute of Building Structures and Structural Design (itke)
Edith Anahí González San Martín, Prof. Dr.-Ing. Jan Knippers
German Institutes of Textile and Fiber Research Denkendorf (DITF)
Felix Wollenhaupt, Dr. rer. nat. Magdalena Herbertz, Lukas Wallinger, Dr. rer. nat. Frank Hermanutz, Dr.-Ing. Hans-Jürgen Bauder, Prof. Dr.-Ing. Götz T. Gresser
Funding
The WoodShape project (grant no. 40573/01-25) is funded by the German Federal Environmental Foundation (Deutsche Bundesstiftung Umwelt, DBU).
Contact
Larissa Born
Dr.-Ing.Deputy Director
Matthias Ridder M.Sc.
Research Associate